Advantage:
1.Cheap alternative.
2.Wash resistant.
3.Sustainable.
4.Protection against dirt.
5.Removable.
6.Dry time: < 5 minute.
7.Spray rate: > 98%.
Usage:
1.Clean the wheel hub with cleaning agent and dry it.
2.Wrap up the brake part with a plastic bag or other similar bags or papers that can protect the brake system from being sprayed during the process. Also pls use card or poker card to insert in the gap between the tire and hub to avoid being sprayed.
3.Choose a place without wind and dust. Before opening the bottle pls shake it for seconds until it is fully uniform and even. Be sure to keep at least 10 cm-15cm distance when spraying and it is highly suggested to keep shaking the bottle during the process in case of sagging.
4.It is required to spray to 4-6 layers( times) altogether.
5.Pls spray a very thin layer for the first time, then keep it for a quarter until you make the second spraying work. And so do the following spraying.
Attention:
1.Trial spraying on small area of unknown materials and it is workable if there are not adverse reaction after 10 minutes.
2.You must assure the can is straight while spraying and the angle is not less than 45 degrees from the horizon.
3.Please do not use in rainy or cold environment.
4.Please work in well ventilation condition and it is good for the spraying effect in cool and dry, dustfree environment.
5.Keep the can away from the children.
6.Storage temperature 0~40°C
7.After use, reversing the empty can and pressing the nozzle to release the remaining gas, then put the empty can in safe place.
8.Storage container cannot be exposure to thermal radiation