Features
Under coating spray is made of high-quality polymer rubber, and the coating is flexible and strong, which can effectively reduce the impact of flying sand stones, effectively isolate noise and prevent rust.
Usage
1.The chassis must be cleaned before use. If the surface is rusty, it can be removed by sanding and keeping the surface of the chassis dry.
2.Cover the brake disc, exhaust pipe, suspension spring, engine oil pan, transmission, sensor and other parts.
3.Shake the can up, down, left and right for about 2 minutes to ensure even mixing.
4.15-30cm away from the surface of the object to be sprayed, press down the nozzle with the finger to spray for more than three times at a uniform speed, with the interval of 5-10 minutes each time.
5.After spraying, need to wait more than 2 hours before starting the vehicle, and 2-3 days for complete drying.
Attention
1.Keep away from children, please work in the air. If swallowed, you should immediately cause vomiting and seek medical advice.
2.Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 °.
3.Flammable, pressure vessel, do not use near fire source.
4.The weight changes over time, which is normal, and the attrition rate is less than 2%/ year.