FEATURES
Carburetor cleaner is composed of aerosol can, aerosol valve, liquid material and propellant, which can effectively remove the deposits such as colloid, oil sludge, paint film, etc., restore the good state of the carburetor and enhance the combustion efficiency. Solve the problem of unstable engine idling and difficult starting.

USAGE

1. Remove the air filter from the carburetor, start the engine, and keep it running at idle speed.
2. After shaking well the product, install the red tube on the nozzle.
3. A part of the material liquid (about 1/3) is sprayed into the carburetor float chamber through the balancing hole, and the measuring holes and the oil path can be cleaned with the flow of fuel oil.
4. A part of the material liquid (about 1/3) is sprayed into the throat and inner wall of the carburetor.
5. The remaining cleaning agent is sprayed to the outside of the carburetor to remove the external sludge and gum.

1. When sticking to the skin, wash it with plenty of soapy water. If you feel uncomfortable, please go to the hospital immediately.
2. In case of accidental contact with the eyes, lift the eyelid and rinse immediately with plenty of water or saline solution, seek medical advice immediately.
3. In case of accidental ingestion, drink a moderate amount of warm water and induce vomiting. Seek medical advice immediately.

1. Keep away from children, please work in the air. If swallowed, you should immediately cause vomiting and seek medical advice.
2. Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 °.
3. Flammable, pressure vessel, do not use near fire source.
4. The weight changes over time, which is normal, and the attrition rate is less than 2%/ year.

Application

It is mainly used for cleaning carburetor, fuel injector, spark plug, throttle and other parts of automobile and motorcycle. It can also be used for the cleaning of metal parts such as engine exterior and chain.